Miele DA 229-2, Инструкции по эксплуатации и монтажу

Страница: 27 / 40

Do not install this exhaust hood over
cooktops burning solid fuel.
When installing the hood, make sure
that the following
minimum dis-
tance ( S ) between the top of a Miele
cooking surface and the bottom of
the hood is:
- 22" (55 cm) above electric cooktops
- 26" (65 cm) above gas cooktops
- 26" (65 cm) above an open grill
For non-Miele cooking appliances
maintain the safety distances recom-
mended by the cooktop manufac-
turer in their installation and operat-
ing instructions.
If there is more than one appliance
beneath the hood and they have dif-
ferent minimum safety distances al-
ways select the greater distance.
See "Warning and Safety instruc-
tions" for further information.
26" (65 cm) is recommended for all in-
stallations to allow for optimum work
space under the hood.
Read the entire installation procedures
and determine height
S before begin-
ning the installation.
If the hood is fitted flush to the ceiling
make sure that the remaining distance
to the ceiling is not greater or less than
appliance height
H .
Standard unit height H :
DA 229-2. . . . . . . . . . . . . 29
1
/
8
" - 42
1
/
8
"
. . . . . . . . . . . . . . . . . . (740 - 1070 mm)
To fit the chimney, distance A between
the top of the chimney and the ceiling
must be at least
7
/
8
" (20 mm).
Cut out area in wall or ceiling for
entrance of 6" (150 mm)
ductwork or 5" (125 mm)
ductwork with a reducing collar.
If the standard unit height H is not suit-
able to the kitchen’s ceiling height, lon-
ger optional chimney extensions are
available from your Miele dealer or
Miele’s Technical Service Department.
Extension available for this model:
DATK 229-650. . . . . . . . . 42
1
/
8
" - 53
3
/
4
"
. . . . . . . . . . . . . . . 1070 mm - 1350 mm
Appliance dimensions
27