Installation
40
Preparing the worktop
Make the worktop cut-out as shown
in “Building-in dimensions” or as
calculated (see “Installing several
ProLine appliances”). Remember to
maintain the minimum safety
distances (see “Safety distances”).
Wooden worktops
Seal any cut surfaces on the wood
worktops with a special varnish,
silicone rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be heat-
resistant.
Make sure that the sealant does not
come into contact with the top of the
worktop.
Position the spring clamps
and the
spacer bars
at the top edge of the
cut-out in the positions shown in the
illustrations.
Secure the spring clamps
and
spacer bars
with the 3.5 x 25 mm
wood screws supplied.
