Switching on and off
24
Switching on
Touch the On/Off sensor
.
The machine will begin rinsing after the
heating-up phase. Hot water will come
out of the central spout.
When
Select drink
appears in the display,
you can make drinks.
If the operating temperature exceeds
60 °C when you switch the machine
on, the rinsing process will not take
place.
If you do not touch any sensors or run a
maintenance programme, the display
will switch itself off after approx.
7 minutes to save energy.
The right hand LED will flash on and off
as long as the machine is switched on.
Touch any one of the sensors to wake
the machine up again to make a
drink.
Switching off
Touch the On/Off sensor
.
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
If you have made a drink using milk,
Place milk pipe in drip tray
will appear in
the display.
Insert the end of the milk pipe into the
aperture in the drip tray, then touch
OK
.
If the milk system is not rinsed out be-
fore switching off, it will have to be
rinsed the next time the machine is
switched on.
Switching off for longer peri-
ods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday:
Empty the drip tray, the waste con-
tainer and the water container.
Clean all parts thoroughly, including
the brew unit.
Switch off and withdraw the plug to
disconnect from the mains if neces-
sary.
The time of day will not be saved. It
will have to be reset next time the ma-
chine is switched on.
Содержание CM6350
Страница 83: ...Dimensions 83 ...
Страница 85: ......
Страница 86: ......
Страница 88: ...M Nr 10 609 630 00 en GB CM6150 CM6350 ...