manualshive.com logo in svg

Miele B 3312, Руководство по эксплуатации

Поделиться
Скачать
Miele B 3312 Скачать руководство пользователя страница 73

Problem solving guide

73

Message

Possible cause and remedy

 

Inlet fault, boiler

Switch off/on

There is a fault with the steam system.

Press the 

 button to switch the steam ironing

system off and then back on again.

After the cool-down phase, the steam ironing system
will carry out a rinse and attempt to correct the fault
itself. The cool-down phase can take up to 3 hours.

Remove the residual water drawer if you are
prompted to do so by the appropriate message in
the display.

Empty and dry the residual water drawer.

Push the residual water drawer back in the tower
until it clicks into place.

There is a fault with the steam ironing system.

If the fault message continues to be displayed,
contact Miele.

 

Press. switch fault

Switch off/on

There is a fault with the steam system.

Press the 

 button to switch the steam ironing

system off and then back on again.

If the fault continues to be displayed, contact
Miele.

 

Boiler fault, warm

Switch off/on

There is a fault with the steam ironing system.

Press the 

 button to switch the steam ironing

system off and then back on again.

If the fault continues to be displayed, contact
Miele.

The steam generator is soiled with water containing
too much limescale or salt.

Start a descaling process (see "Starting the
descaling process early"). To avoid this problem in
the future, the preset water hardness level can be
set one level higher (e.g. from 

Level 4

 to 

Level 5

, see

"Setting the water hardness").

If the fault continues to be displayed, contact
Miele.

Содержание B 3312

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды