Miele B 3312 Скачать руководство пользователя страница 46

Страница: 46 / 80

Dismantling

Disconnecting the steam hose

Do not pull on the steam hose.
Hold the plug at the end of the steam
hose. The plug may still be warm
immediately after using the system.



Pull back the sliding switch located
on the side of the steam hose plug.



Hold back the sliding switch.



Withdraw the plug from the steam
connection socket.

After withdrawing the plug, drops of
water may escape from the steam hose.

Storing the iron



The iron soleplate is still very hot

after use!
Avoid direct contact.
Allow the iron to cool down after use.
Do not stow the iron away while it is
still attached to the hose.



Place the iron on the resting surface
on the tower and let the iron cool
down.



When cool, store the iron and the
steam hose holder in the (top) storage
compartment.

Storing the steamer

Never put the steamer away while it
is still connected to the steam
connection socket.



Store the steamer in the (lower)
storage compartment.

Содержание B 3312

















































































Результаты поиска

Содержание B 3312

Отзывы:

Бренды по названию

Популярные бренды

Miele B 3312, Руководство по эксплуатации

Результаты поиска

Содержание B 3312

Отзывы:

Бренды по названию

Популярные бренды