Miele B 2312 Скачать руководство пользователя страница 10

Страница: 10 / 76

Always place the iron with the steam function switched off on the

iron rest so that the sole plate doesn't overhang any side.
Otherwise, there is a risk of burning.

Danger of burning! The iron rest becomes hot if the iron is left to

rest on it for a long time. Avoid any direct contact with the iron rest
while it is hot. Only touch the handle at the back of the iron rest.

Danger of burning! Do not direct steam towards people, animals

or any kind of electrical device.

Danger of burning! Do not attempt to use the steam function on

clothes that are being worn by someone.
The clothes will increase the severity of burns to the skin.

Never leave the iron or steamer unsupervised while switched on.

Switch off at the wall socket if the appliance is to be left
unsupervised.

Switch the appliance off before switching off at the wall and

removing the plug.

Hold the plug, not the connection cable, when disconnecting

from the wall socket.

Ensure the hot sole plate does not come into contact with either

the connection cable or the steam hose.

The iron or the steamer must

not

be connected when the

appliance is being descaled. You do not need to supervise the
appliance during the descaling process.

The iron must not be stored in the top storage compartment while

it is still

connected

. This could result in damage to the steam ironing

system.

Warning and Safety instructions

Содержание B 2312













































































Результаты поиска

Содержание B 2312

Отзывы:

Бренды по названию

Популярные бренды

Miele B 2312, Руководство по эксплуатации

Результаты поиска

Содержание B 2312

Отзывы:

Бренды по названию

Популярные бренды