Miele Allerwash W 3574 WPS, Руководство по эксплуатации

Страница: 37 / 68

The wash programme stops and a fault indicator light comes
on.
Problem Possible cause Remedy
A
The buzzer sounds and
the Check drain light
flashes. "– – –" appears
in the display. The drain outlet is
blocked. Clean the drain filter and the
drain pump as described in
"Problem solving guide -
Opening the drum door in the
event of a blocked drain outlet
and/or power failure".
The drain hose has
been fixed too high. The maximum drain height is
1 m.
The buzzer sounds and
the Check inlet light
flashes. "– – –" appears
in the display. The water inlet is
blocked. Open the stopcock.
The buzzer sounds and
the Check inlet and
Check drain lights are
flashing. "– – –" appears
in the display. The water protection
system has reacted. Call the Service Department.
The buzzer sounds and
the Soak/Pre-wash or
Rinses indicator light is
flashing. "– – –" appears
in the display. There is a fault. Start the programme again.
If the fault indicator occurs
again, contact the Service
Department.
A
To switch off the fault indicator: switch the washing machine off with the
I-On/0-Off button and turn the programme selector to Finish .
Problem solving guide
37