Miele 11653560, Руководство по эксплуатации

Страница: 60 / 100

Problem solving guide
60
Fault message after a programme has been interrupted.
Problem Cause and remedy

Drainage See 
The drain is blocked or restricted.
The drain hose has been fixed too high.

Clean the drain filter and the drain pump.
 The maximum drain height is 1 m.

Water intake See

The water inlet is blocked or restricted.

Check whether the stopcock has been properly
opened.
 Check whether the inlet hose is kinked.

Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.

Clean the filter.
The drain pump is activated for 2 minutes. The washing
machine door is then released. Wait for the drain pump
to stop before switching the washing machine off.
 Waterproof system.
Turn off   Ser-
vice
The water protection system has reacted.

Close the stopcock.
 Call the Miele Customer Service Department.

 Service Fault F
There is a fault.
 Disconnect the washing machine from the electri-
city supply. Switch off at the wall and withdraw the
plug from the socket, or disconnect the fuse.
 Wait at least 2 minutes before reconnecting the
washing machine to the electricity supply.
 Switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact the
Miele Customer Service Department.
To switch off the fault message: Turn the programme selector to the

position
and switch the washing machine off.