Miele 11653560 Скачать руководство пользователя страница 35

Страница: 35 / 100

7. End of programme

Opening the door and remov-
ing the laundry

The door remains locked during the
anti-crease phase. The display will
change to show:

Finish/Anti-crease



Press Start button



Unlock the door either by touching
the

Start

Add laundry

sensor control

or by turning the programme selector
to the



position.

To switch on the drum lighting, unlock
the door with the

Start

Add laun-

dry

sensor control.

The door will unlock.

Tip:

After the anti-crease phase, the

door will have unlocked automatically.



Reach under the door grip and pull
the door open.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.



Check the door seal for any foreign
objects.

Tip:

Leave the door slightly open to al-

low the drum to dry.



If applicable, remove the used cap-
sule from the detergent drawer.

Tip:

Leave the detergent drawer slightly

open to allow it to dry.

Содержание 11653560





































































































Результаты поиска

Содержание 11653560

Отзывы:

Похожие инструкции для 11653560

Бренды по названию

Популярные бренды

Miele 11653560, Руководство по эксплуатации

Результаты поиска

Содержание 11653560

Отзывы:

Похожие инструкции для 11653560

Бренды по названию

Популярные бренды