Miele 11653560, Руководство по эксплуатации

Страница: 92 / 100

Settings
92
Maximum rinse level
This function is important for allergy
sufferers as it achieves excellent rinse
results.
The water level in the rinses can be per-
manently set to the highest value. The
water consumption will be increased.
The maximum rinse level is deactivated
as standard.
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when a Cot-
tons programme with a temperature of
70 °C or higher is selected.
Suds cooling must be activated:
- To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin
- In buildings where the drainage pipes
do not comply with DIN 1986
Suds cooling is deactivated as stand-
ard.
Low water pressure
If the water pressure is below 100 kPa
(1 bar), the washing machine cancels
the programme and the
Water intake
See  fault message appears.
If the on-site water pressure cannot be
increased, activating this function will
prevent the programme from being can-
celled.
Low water pressure is activated as
standard.
Anti-crease
The anti-crease function reduces
creasing after the end of the pro-
gramme.
At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes. The washing machine door
can be unlocked at any time by touch-
ing the
Start / Add laundry sensor control
and then opened.
Anti-crease is activated as standard.