MIE Pulito Vapore, Руководство по эксплуатации

Страница: 32 / 52

30
Operating Instructions
WHAT TO CLEAN ACCESSORIES
Carpeted surfaces.
It is necessary to first vacuum the treated surface. Treat the
surface with steam using the floor attachment, maintaining a
distance of 15 cm. Place the fabric cover onto the attachment
and wipe in two directions — the second stroke being at right
angles to the first. Particularly dirty surfaces can first be cleaned
with a light detergent solution, followed by a steam clean.
Floor attachment
with the fabric cover,
extension tube.
Stain removal.
Use the high-pressure steam attachment to remove stains,
keeping it at a distance of 5-10 cm from the carpet. Blot the
area with a towel. Repeat the procedure if necessary. DO NOT
OVERHEAT WALLS AND CEILINGS!
High-pressure steam
attachment, towel,
extension tube.
Painted, paneled and papered surfaces.
Painted walls, wallpaper, and wood panels are sensitive to
steaming. Always use the fabric cover when cleaning. Do not
steam the same area for a long time. Let the surface cool, then
repeat. Particularly dirty surfaces should first be treated with
steam, followed by using the floor attachment or rectangular
brush with the fabric cover. A light detergent solution can be
used alongside steaming to facilitate the removal of dirt. Clean
wood panels quickly and check the covers for overheating.
Use the rectangular brush with the fabric cover to remove any
remaining dirt.
Floor attachment,
rectangular brush,
fabric cover, extension
tube, high-pressure
steam attachment.