MIE Completto standart, Руководство пользователя

Страница: 22 / 53

User manual
3
ATTENTION!
•
Connect the appliance only to a grounding-type power outlet.
•
Regularly check the cord and steam supply hoses for damages.
•
Before removing the cover from ironing table, make sure that the
appliance is cold. The soleplate can reach extremely high
temperatures and cause burns if the device is handled carelessly.
The outgoing steam and the areas of iron that are adjacent to
soleplate and steamer nozzles are very hot during operation of the
appliance. Avoid direct contact with objects described, there is a
risk of burns. Always place the iron horizontally on the stand of the
ironing system. Make sure that the steam supply function of iron is
disabled, and its soleplate does not protrude beyond the edges of
the stand. Do not place iron in places that are not intended for this
purpose to avoid the risk of fire. The stand can get very hot if the
iron is on it for a long time, do not touch the heated stand.
•
Unplug the appliance from power supply after you have finished
using it and before cleaning the appliance, or if you leave it
unattended even for a very short time.
•
Do not move the appliance during operation.
•
Do not use the appliance for ironing very wet fabrics.
•
Always place the appliance on a flat and stable horizontal surface.
•
Do not cover the appliance immediately after using it.
•
Always put the appliance back in its storage place, after folding the
ironing table.
•
There is burns hazard! Never point the steam jet or steam nozzles
of iron and steamer directly at people, animals or any electrical
appliance. Do not point the steam jet at body parts covered with
clothing! Clothing increases the burn probability. It is not allowed
to clean the ironing system with a high-pressure steam cleaner.
•
Do not hang laundry on the folded ironing system. There is danger
that the system will tip over due to lever action.
•
Never install the ironing system near gasoline, kerosene or similar
flammable substances. There is a risk of fire and explosion!
•
There is risk of pinching by moving parts of system! When
installing, removing and adjusting the height of the ironing system,
do not put hands between moving parts. When adjusting the
system, make sure that the network cable is not pinched.