background image

For testing 12-volt 

automotive starting 

batteries

INSTRUCTION MANUAL

 Model No:  

For batteries rated in:

PBT-100  USA    

CCA, SAE 

PBT-100 AP  Asia 

CCA, SAE, DIN, IEC, & EN

PBT-100 LA  Latin America 

CCA, SAE, DIN, IEC, & EN

PBT-105  Europe 

CCA, SAE, DIN, IEC, & EN

Battery Conductance Tester

TABLE OF CONTENTS

Caution & Warning ................................................... 3

Prior  To  Testing  The  Battery ................................ 3

Testing Out-of-Vehicle  ......................................3

Testing In-Vehicle ..............................................3

PBT Testing Advantage  ....................................4

Conductance Technology  ................................4

Battery  Test  Procedure .......................................... 5

Battery Test Results ................................................. 5

Charging System Test Procedure ........................... 6

Starter System Test Procedure ............................... 7

Rating Systems ........................................................ 7

To Select Battery Rating System ............................ 8

Troubleshooting ....................................................... 8

Содержание PBT-100 AP

Страница 1: ...BT 105 Europe CCA SAE DIN IEC EN Battery Conductance Tester TABLE OF CONTENTS Caution Warning 3 Prior To Testing The Battery 3 Testing Out of Vehicle 3 Testing In Vehicle 3 PBT Testing Advantage 4 Conductance Technology 4 Battery Test Procedure 5 Battery Test Results 5 Charging System Test Procedure 6 Starter System Test Procedure 7 Rating Systems 7 To Select Battery Rating System 8 Troubleshootin...

Страница 2: ...h defects or other reproductive harm Wash hands after handling 4 PBT Testing Advantage The PBT 100 digital battery tester uses Midtronics patented conductance technology to determine if the battery is good or bad even when discharged This means you can safely quickly and accurately test a battery anywhere Conductance Technology Conductance is a measurement of the battery s ability to produce curre...

Страница 3: ... A REPLACE reading when testing in the vehicle may mean a poor connection between the vehicle s cables and the battery Disconnect the battery cables and retest before replacing the battery If conn shows in the display there is a bad connection Disconnect the clamps and reconnect Make sure to rock the clamps back and forth to make a good connection If the screen flickers or shows lines the battery i...

Страница 4: ... For JIS use conversion table on back of the tester 8 TO SELECT BATTERY RATING SYSTEM 1 Connect the negative clamp black to the negative terminal 2 Press and hold the TEST key 3 Connect the positive clamp red to the positive terminal 4 After the display shows the letters of the rating system with dots for example C C A release the TEST key 5 Use the ARROW keys to scroll to the desired rating syste...

Отзывы: