background image

The MDX series is made by Midtronics, Inc., and is protected by one or more U.S. and foreign patents. 
For specific patent information, contact Midtronics, Inc. at +1 630 323-2800.

Midtronics products are warranted to be free of defects in materials and workmanship for a period of one (1) year from date of 
purchase. Midtronics will, at our option, repair or replace the unit with a re-manufactured unit. This limited warranty applies 
only to Midtronics battery testers and does not cover any other equipment, static damage, water damage, overvoltage, dropping 
the unit, or damage resulting from extraneous causes including owner misuse. Midtronics is not liable for any incidental or 
consequential damages for breach of this warranty. The warranty is void if owner attempts to disassemble the unit or to modify 
the cable assembly.

Willowbrook, IL USA
Phone: 1.630.323.2800

Canadian Inquiries
Toll Free: +1 1 866 592 8052

MIDTRONICS HEADQUARTERS

MIDTRONICS B.V. EMEA

MIDTRONICS CHINA

MIDTRONICS INDIA

European Headquarters
Houten, The Netherlands
Serving Europe, Africa, the Middle East
Phone: +31 306 868 150

China Operations 
Shenzhen, China
Phone: +86 755 2374 1010

Navi Mumbai, India
Phone: +91 22 27564103/1513 

Asia/Pacífic (excluding China) 
Contact Corporate Headquarters 
Phone: +1.630.323.2800

2017 ©Midtronics, Inc. All rights reserved.

PATENTS

LIMITED WARRANTY

Midtronics B.V.     Hoofdveste 6     3992 DG  HOUTEN

www.midtronics.com

Содержание MDX-500 SERIES















Отзывы: