
2
1.
Introduction
R718PA4is a long-range wireless occupancy detection device for
MiDoMet
Class A type devices based on LoRaWAN open protocol.
The R718PA4 can be connected to a hydrogen sulfide sensor with RS485 to report the concentration of hydrogen sulfide collected by the device to the
corresponding platform. The device is compatible with the LoRaWAN protocol.
LoRa Wireless Technology:
LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods,
LoRa spread spectrum modulation method greatly increases to expand the communication distance. Widely used in long-distance, low-data wireless
communications. For example, automatic meter reading, building automation equipment, wireless security systems, industrial monitoring. Main features
include small size, low power consumption, transmission distance, anti-interference ability and so on.
LoRaWAN:
LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways from different
manufacturers.
2. Appearance
Fig.1 R718PA4 Appearance
3. Main Features
Adopt SX1276 wireless communication module
12V DC power supply
Hydrogen sulfide H
2
S sensor detection
The base is attached with a magnet that can be attached to a ferrous object
Protection class IP65
Compatible with LoRaWAN
TM
Class A
Frequency hopping spread spectrum
Configuration parameters can be configured via a third-party software platform, data can be read and alerts can be set via SMS text and email (optional)
Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne
4.Set up Instruction
On/Off
Power on
DC12V adapter
Turn on
Press and hold the function key for 3 seconds till the green indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till the green indicator flashes for 20 times.