MidNite Solar MNKID-B, Руководство пользователя

Страница: 8 / 16

Midnite Kid Basic Solar Charging Kit
8 | P a g e 1 0 - 4 0 4 - 1 R E V -
All of your Negative wires will come to this busbar. To install it there are 2 screws in the KIT that will attach
the black mounting brackets to the BigBaby.
Big Baby Wiring
NOTE: Please consult your KID manual or see http://www.midnitesolar.com/pdfs/10-293-1_REV-
E_KIDManual.pdf for accessories that might need to be wired at this time such as ground wires, load and
load wiring, etc.
(HINT) Leave yourself some extra length of wire pulled into the Big Baby so you can make your connections
more easily. Once the wiring is complete, some of this excess can be pulled back out but be sure to leave a
small amount of slack inside the box to minimize strain on the connections.
Solar GFP and breaker wiring
Run the wires that come from your solar module through the bottom of the BigBaby. There are holes in the
Strain Relief for passing the wires through and into the box. If the
fitment of the wires seems loose, you can
tighten the adjustment by twisting the top adjuster nut using an adjustable wrench or large pair of pliers.
You can run the wires to the solar modules, but do not make the final connections yet or you will be working
with live wires. Make sure all breakers are off.