6
MIDLAND TEAMS M-15
Charging the TEAMS M-15 Headset
Make sure that your TEAMS M-15 Headset battery is charged for at least 3 hours before initial use.
To charge the unit:
Using the USB-C cable, connect your computer or wall charger to the USB port on your TEAMS M-15 HEADSET.
•
Charging with the wall charger is faster than via a computer USB port.
•
Charging your unit switches it off automatically. To use your unit while it is being charged, switch it back
on.
•
Charging is possible only if using Li-Ion batteries.
While charging, the LED indicates the charging status as follows:
• Red LED on — charging
• Green LED on — charging complete
TIP: You can check the battery charge at any time by saying “Hey Midland, battery status.”
Wearing Instructions
Wearing Instructions for TEAMS M-15 Headset Headband Type
To place the headset in the appropriate manner, make sure that you:
• Position the cups over your ears in a way that they fully enclose the ears
• Seal the cushions tightly against your head
• Adjust the height of the cups by sliding them up or down
Note: The headband should be straight on top of your head.
To fit the helmet with the headset on your head:
Tighten the headset so that they press on your ears. Press until you hear a distinct click
Switching Your Unit ON/OFF
To switch your TEAMS M-15 Headset on:
Press both the
Intercom
and the
Multi-Function
(
MF
) buttons for 1 second.
The speaker plays an ascending tone, and a voice message greets you. The LED confirms your TEAMS M-15 HE-
ADSET is on:
•
Normal and low battery
- LED flashes blue three times, then green.
•
Charging
- LED flashes red and purple three times.
Содержание TEAMS M-15
Страница 2: ......
