Midland SIDE DUMP GRAVEL TRAILER, Руководство оператора

Страница: 17 / 101

5
2.4 HYDRAULIC SAFETY
1. Make sure that all components in the hydraulic
system are kept in good condition and are clean.
2. Replace any worn, cut, abraded, flattened or
crimped hoses or lines.
3. Relieve hydraulic pressure completely before
working on hydraulic system.
4. Do not attempt any makeshift repairs to the
hydraulic fittings or hoses by using tape, clamps
or cements. The hydraulic system operates under
extremely high-pressure. Such repairs will fail
suddenly and create a hazardous and unsafe
condition.
5. Wear proper hand and eye protection when
searching for a high-pressure hydraulic leak. Use
a piece of wood or cardboard as a backstop
instead of hands to isolate and identify a leak.
6. If injured by a concentrated high-pressure
stream of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction
can develop from hydraulic fluid piercing the skin
surface.
7. Before applying pressure to the system, make
sure all components are tight and that lines,
hoses and couplings are not damaged.
2.5 TRAVEL SAFETY
1. Read and understand all the information in the
operator’s manual regarding procedures and
safety when operating the Trailer unit in the field
or on the road.
2. Make sure all the lights and reflectors that are
required by the local highway and transport
authorities are in place, are clean and can be
seen clearly by all overtaking and oncoming
traffic.
3. Drive carefully and defensively at all times and
especially when negotiating uneven or hilly
terrain.
4. Do not allow riders on any part of the trailer.
5. Make sure you are in compliance with all local
regulations regarding transporting on public
roads and highways. Consult your local law
enforcement agency for further details.
2.6 LOADING SAFETY
1. Do not drop load on trailer to prevent damaging
sides or bottom.
2. Use common sense when loading material
containing large rocks or frozen chunks to prevent
damaging tub.
3. Do not exceed total carrying specifications for
trailer.