background image

Model GXT760/795 Series

Page 10

www.midlandradio.com

When the Battery Meter drops to 1 bar           , the TX Power will
automatically switch from Hi(H) or Med(M) to Lo(L) level.

Note : You cannot adjust the power setting on the FRS   
channels (8~14 and 34~37). They are set to Low power per 
FCC regulations.

VOX (Hands-free Transmission)

Your radio has 5 VOX level settings: 

(oF/1~5)

.

To set

VOX

, press the 

MENU

button until the display shows “

VOX

blinking  while  on  the  right  of  the  

CHANNEL NUMBER

display,

an “

oF

” icon appears. Select “

1

~

5

” by pressing the        buttons and

push the 

PTT

key, or press 

MENU

button again to move to the next

feature setting.  

VOX

will be more sensitive on the 

1

setting than on the 

5

setting.

To turn 

VOX

off

, press the 

MENU

button until the display shows

VOX

” blinking while on the right of the 

CHANNEL NUMBER

display,

a “

1

~

5

” icon appears. Select “

oF

” by pressing the       buttons and

push the 

PTT

key, or press 

MENU

button again to move to the next

feature setting.

SILENT OPERATION 

Your GXT760/795 Series has a 

SILENT OPERATION

mode. In this

mode, all “beeps” and “tones” are disabled. 

To turn the 

SILENT OPERATION

mode on

, press the 

MENU

button

until the display shows an “

bP

”  icon while on the right of the “

bP

display, an “

on

” icon appears. Select “

of

” by pressing the        buttons

and push the 

PTT

key or 

MENU

button. 

To turn the 

SILENT OPERATION

mode off

, press the 

MENU

button

until the display shows an “

bP

”  icon while on the right of the “

bP

display, an “

oF

” icon appears. Select “

on

” by pressing the

buttons and push the 

PTT

key or 

MENU

button.

ROGER BEEP (end of transmission) TONE

When the 

PTT

button is released, the radio will beep to confirm to

other users that your transmission has finished. 
To turn the 

ROGER BEEP

tone on, press the 

MENU

button until the

display shows an “

rb

”  icon while on the right of the “

rb

”  display, an

oF

” icon appears. Select “

on

” by pressing the           buttons and push

the 

PTT

key, or press 

MENU

button to move to the next feature

setting.

/

/

/

!

/

/

Содержание GXT760 series







Отзывы: