background image

Model GXT760/795 Series

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the 

LOCK

button for 2 seconds. The 

KEY LOCK

icon will appear on the display.

PTT

and 

CALL

will still be active. Repeat the same procedure to

unlock the keypad.

DISPLAY ILLUMINATION

During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the

MENU

,

MON/SCAN

, and

button is pressed.

CHANNEL SELECTION (GMRS/FRS BAND)

Press the 

MENU

button once, and then the         buttons to select one

of the 42 GMRS/FRS channels. To confirm the selection, press the

PTT

button or press the 

MENU

button again to move to the next

feature setting.

SETTING PRIVACY CODES

Your GXT760/795 Series has 142 

Privacy Codes

available. The

selected 

Privacy Code

may be different for each channel. To select

Privacy Code

for the current channel press the 

MENU

button

twice, and then the        buttons to select between 

Off/CTCSS/DCS

.

Press again the 

MENU

button and the        button to select one of the

38 

CTCSS Codes 

or one of the 104 

DCS Codes

. The 

Privacy Code

icon on the display will indicate whether you set your Privacy Code in

CTCSS

or 

DCS

mode. To confirm the selection, press the 

PTT

button

or press 

MENU

button again to move to the next feature setting.

Note

: If you select any 

CTCSS

Privacy Code, any pre-selected 

DCS

Privacy Code will be cancelled and vice-versa. Selecting a 

Privacy Code of  "

oF

" will disable the Privacy feature. To commu-

nicate between two GXT760/795 Series radios, all radios in your 
group must be set to the same channel and Privacy Code. 

The 

Privacy Code can only be set in  channels 1~22

.

TRANSMIT (TX) POWER LEVEL SELECTION

Your GXT760/795 Series has 3 power level settings. To select the
power level on channels 1~7, 15~33 and 38~42, press the 

MENU

button until a “

Pr

” icon will appear blinking on the display. Then press

the         buttons to select 

TRANSMIT POWER LEVEL

icon 

(H: 

Hi

/

M: 

Mid

/L: 

Lo

)

. To confirm, press the 

PTT

button or press 

MENU

button again to move to the next feature setting. 

/

/

/

/

Page 9

www.midlandradio.com

!

/

Содержание GXT760 series







Отзывы: