Midland Enerjump Work, Инструкция по эксплуатации

Страница: 9 / 48

7
ENERJUMP WORK

SAFETY INSTRUCTIONS / WARNINGS
• Charge Enerjump Work fully prior to use.
• WARNING : Keep the unit clear of fire and water.
•
WARNING
: Shock Hazard. Keep away from children. Do not insert foreign objects into the DC input
jack, USB ports or into the jumper cables jacks. Do not open Enerjump Work .
• WARNING : Explosion Hazard. Do not use this product where there are flammable fumes or gases,
such as in the bilge of a gasoline-powered boat, or near propane tanks.
• Do not leave Enerjump Work completely unattended while being charged; please check the recharge
will proceed regularly.
• Do not charge the device close to flammable substances.
• WARNING : Fire Hazard. Do not crush or puncture Enerjump Work . Do not short circuit metal con-
tacts or cables. Always disconnect the jump start cables from Enerjump Work after each use and store
separately. The jump start feature is designed for short term operation only. Allow Enerjump Work to
cool down for at least 1 minute after each jump start attempt.
• Do not touch cables immediately after use, they could be overheated.
IMPORTANT SAFETY INSTRUCTIONS
• Operating temperature: Using Enerjump Work at high or low temperatures may reduce the internal
battery capacity and shorten the battery life.
Note: In extreme cold weather conditions, please bring Enerjump Work indoors for best results.
• Remove personal metal items such as rings, bracelets, necklaces, and watches when working with bat-
teries.
GENERAL WARNINGS
• Enerjump Work is supplied with a rechargeable Li-Cobalt battery. This battery is self-contained and
not consumer replaceable. Battery must be disposed of properly when it no longer holds a charge.
• Proper charging practices will increase the life of the batteries.