Midland DV-2066, Руководство пользователя

Страница: 3 / 6

3
PC Software
Function Setup
If you program this page as below, you will not experience any problem
Changing of temporary channel
parameters
Accidental TOT, auto power off,
Accidental erasing
Eliminating end TX noise
Choose TX power
Alarm pin Level
 60W / 45 W = DV-2066 Pin 2 (Max 50mA) setting to trigger transistor to activate relay
 25W / 25W = DV-2135 and DV 2400 Duration of setting after successful decode of 5-tone format or Emergency Call
When the press the “DIAL”
button on the microphone and
DTMF is program on the channel
“M1~M16” will appear on the Dot
Matrix screen and by using the
up & down buttons on top the
microphone you can select the
correct number from the list.
When programming Remotely Kill /
Stun number remember to
program a Remotely awake
number in the 5-Tone menu