Midland 13-898B, Руководство пользователя

Страница: 14 / 23

OPERATiNG IN STRU CTIO N S
1. Insert the MIC pług in the MIC Jack.
2. Make sure your antenna is securely connected to the ANT connecter.
3. Tum the Power on as stated in this manuał.
4. Set EF GAIN to maximum tempo rar iły.
5. Tum the SQUELCH knob counter-clockwise fully.
6. Place the FINE TUNE knob at center position.
7. Place the CB-РА push switch in the CB position.
8. Place the ANL-BLANKER push switch in either position.
9. Place the channel selector switch
ł o
a
desired channel.
10. Place the mode selector switch in a desired mode position.
11. Adjust the VOLUME control for proper sound level.
12. То transmit press the Push-to-talk button on the microphone and to receive release the button.
IMPORTANT: Do not short circuit the antenna or do not try te transmit without an antenna
connected to the Antenna connecter on the rear panel. This may cause damage to
the output power transistors. Transmit only after carefully checking the installation
of connecter and coaxial cable.
- 13 -