background image

15

Trouble Shooting

If anything doesn’t work . . .

please check following points:

Midi connection fault . . .

do you have installed your midi drivers from your soundcard ?
Look at START --> Settings --> System control --> Multimedia --> Tab Midi
for installed Drivers. If not, you have to do this first. After that your Keyboard should work
with your computer. Attention: In some programs you have to set the Input-Port, before you
can receive Midi-data. Please check!!

Audio is delayed . . .

This problem is often attached to the midi device, but in reality it is a problem of the sound
card in your computer. Many sound cards have an adjustable latency time, they are used to
work with slow computers, and so audio is not interrupt. At the installing of the sound card,
the latency time is set to maximum value e.g. 512 samples, and this is too much, so your
midi-notes are sounding delayed. Adjust this value to a minimum that is possible for your
computer, and you will hear audio correct. But you can connect your keyboard to a sound
expander too, and you will see that’s no problem of your keyboard.

Midi Device is not recognize . . .

There are some misunderstandings, because a midi device is not recognizable by computer,
except USB. The midi standard does not support recognizing of devices!
 The 

ιιιι

² Control-61

  is recognized by USB but not by midi-interface, this is normal!!

Pedal doesn’t work . . .

May be you have the wrong pedal type. There are two types of pedals in the market: One is a
pedal  with  an  open  contact,  and  if  pressed  it  closed,  and  one  is  with  a  closed  contact  and
opened if pressed. The keyboard needs a pedal with an open contact!

Содержание i Control-61




















Отзывы: