background image

- 1- 

RF Wireless Slim Keyboard and Mouse Desktop 

Instruction Manual 

Version: GT3.0 

 

 

The wireless keyboard and optical mouse operate with digital radio technology. There is no 

connecting  cable  to  pile  up  desktop.  The  keyboard  and  mouse  use  radio  frequencies  to 

send  data  to  the  receiver,  which  forwards  these  to  your  computer.  You  can  use  the 

keyboard and mouse on any computer equipped with a free USB interface. There are two 

channels, CH1 and CH2 for your selection.                                   

 

 

CE marking

 

 

 

This  equipment  complies  with  the  requirements  of  Directive  1999/5/EC  of  the  European 

Parliament and Commission from 9 March 1999 governing Radio and Telecommunications 

Equipment and mutual recognition of conformity. 

 

BATTERY INSTALLATION 

The cordless optical mouse uses two AAA rechargeable batteries. 

pic.1 

1.  Press the tab to remove the battery 

compartment cover on the bottom of the 
mouse. 

2.  Insert two supplied AAA rechargeable 

batteries in the battery compartment 
according to the polarity marked inside. 

3.  Replace the cover. 

 

The cordless keyboard uses two AAA batteries. 

pic.2 

1.  Press the tab to remove the battery 

compartment cover on the bottom of the 
cordless keyboard. 

2.  Insert two AAA batteries according to the 

polarity marked inside. 

3.  Replace the cover.     

 

 

PDF created with FinePrint pdfFactory trial version 

http://www.fineprint.com

Содержание P7202












Отзывы: