3
is as bellows:
For mouse to set channel
If you decide to use
“
CH 1
”
for mouse,
1. Remove the battery compartment cover on the mouse, turn the button inside the
compartment to
“
CH 1
“
and replace and close the cover.
2. Press the
“
CONNECT
“
key on the receiver.
3. Press the
“
CONNECT
”
key on the bottom of the mouse.
Then the CH1 can be set successfully.
Note:
the same way for
“
CH 2
“
setting.
For keyboard to set channel
The channel of keyboard can be detected automatically. If you decide to use
“
CH 1
“
for
keyboard, you just turn the button on the bottom of the keyboard to
“
CH 1
“
, then the CH1
can be set successfully. If you want to change to
“
CH 2
“
, you just turn the button to
“
CH 2
“
, then the keyboard can be changed to
“
CH 2
“
.
Pic6
CHANGING COMMUNICATION CODE
The desktop has a communication code to the computer to avoid interference with other
desktops. Change the code if there is any interference. The interference only exists when
more than one mouse and keyboard are used at the same time.
It need you reset the ID wireless link
A
1
Pic5
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com
