midiplus Dreamer Series, Руководство пользователя

Страница: 7 / 32

5
1. Normal Mode
Each time you touch the button,the CC value of the button will change.By touching
the LED is on and releasing the LED is off.And at this mode,the Encoder is used to
change the selected button's CC value quickly( turn right to increase and left to
decrease).
For example,change the volume.The default button of "Volume"is F5.the following
steps will help you.
First,Select F5 button by touching.
Second,touch F5 button one or more times,or turn the Encoder to achieve the
volume.
Note :By touching the button one or more times,you can tune the CC value slowly.If
you want to change the value quickly,please use the Encoder.By turning the
Encoder,the value can be changed from 0 to 127 or from 127 to 0.
2. Edit Mode
At this Mode,you can select the button you want to edit by touching.When you
touching a button,the CC value will not be changed and the LED under the button will
light on.You can configurate the selected button by turning the Encoder.
For example,edit the F5 button to a "Program" button.The following steps will help
you.
First,Press the Encoder Switch to switch to Edit Mode.
Second,Select F5 button and the LED under it will light on.
Third,Turn the Encoder.Stop turning when the LCD displays:Program.
Forth,Press the Encoder Switch to switch to Normal Mode.
Note: Switch to the Normal Mode,the edit will be stored in the memory.For the details
of the function ID,please refer to Appendix 1.
7. Factory Reset
First press the Encorder Switch,then power on the device,now the device is ready to
restore to factory setting.During the factory reset,the LCD will dispaly "Enter to
confirm Factory reset>F1" and the F1 button LED will twinkle.If you want to restore to