midiplus Dreamer Series, Руководство пользователя

Страница: 5 / 32

3
1
．
Keyboard
● With 61 or 88 semi-weighted and velocity sensitive keys.
● By changing "Transpose" or "Octave" value,these 61/88 physical keys can be
used as 128 logical keys.
2
．
PitchBend Touch Bar
● You can modulate the Pitch by moving your finger up and down on the PitchBend
Touch Bar.Moving up the pitch will increase and down the pitch will decrease.
Release or touch the middle of the Bar,pitch unchanged.Just act as the custom
PitchBend Wheel.
3
．
Modulation Touch Bar
● You can increase or decrease the vibration by moving your finger up and down
on the Modulation Touch Bar.Moving up the vibration will increase and down the
vibration will decrease.Releasing will hold the vibration.Just act as the custom
Modulation Wheel.
4
．
6 editable Touch Buttons F1~F6
● Normal Mode:The CC value will increase 1 each time when you touch a button.
When touching the LED is on and releasing the LED is off.And the value will
display on the LCD at the same time.The default functions of F1 ~ F6 are:
F1:Transpose F2:Octave F3:Chanel F4:Program F5:Volume F6:MIDI IN.
● Edit Mode:Touch and select the button you want to edit,then you can edit the
selected button's function by turning the Encoder.(Only the selected button's
LED will light on)
5. LCD display
● Power on display:LCD flickeringly displays with:Manufacture name,Product
name and the Version of Firmware.
● Standby display (Only at Normal Mode): First line:"MIDI IN:_ "
，
Second line:"
Chl:_ Pro:_ ".Each parameter is short for: MIDI IN ON/OFF, Chanel, Program.
● Operation display:Point out the current operated controller's information
First line:Controller's name,Second line:Parameter's CC Number and CC Value.
6. Encoder
● Normal Mode:you can use the Encoder to adjust the value of the last button you
touched.
● Edit Mode:You can use the Encoder to configurate the function of the last
button you touched.
7. Encoder Switch
● The Encoder Switch is used to switch the Mode of the button. You can switch
the two Modes by pressing the Encoder Switch.(Power on the device,the
default mode is Normal Mode.)