Midian VS-1000-VX1, Руководство по установке

Страница: 7 / 22

7
Programming the Audio Levels: After determining the audio levels at the audio hookup points, it is necessary to
program the scrambler for these levels. In the programming software, there is a slider control on the Audio Levels
Screen for each of the of four audio hookup points. Locate the column that corresponds to the modulation and
units of measurement for each of the audio hookup points. Adjust the slider bar such that the value appearing in
the appropriate column matches what was measured as closely as possible. The following table shows Midian’s
recommended levels for the VS-1200/VS-1100/VS-110 at 60% modulation:
Radio Model RX In TX In RX Out TX Out
VX-350 240 96 240 54
VX-410, VX-420 282 198 414 156
VX-450, VX-460 390 192 354 546
VX-600, VX-900 348 24 510 72
VX-820 324 66 540 48
VX-920
VX-2100, VX-2200 384 48 378 42
VX-4100, VX-4200 354 210 324 168
VX-4500, VX-4600 390 192 354 546
VX-5500 222 30 276 30
VX-6000 276 54 276 54
The following table shows Midian’s recommended levels for the VS-1000/VS-1050 at 60% modulation mVpp:
Radio Model RX In TX In RX Out TX Out
VX-350 240 114 240 48
VX-410, VX-420 282 198 414 156
VX-450, VX-460 390 192 354 546
VX-600, VX-900 348 90 444 66
VX-820 324 66 540 48
VX-920
VX-2100, VX-2200 402 96 402 96
VX-4100, VX-4200
VX-4500, VX-4600 390 192 354 546
VX-5500 234 54 318 54
VX-6000
Beep Volume Level:
Adjust the slider for the desired beep volume. This level is expressed as a percentage of max voice audio level.