23
OPERATION
ANI Encode:
When the PTT button is pressed, the unit will assert the PTT Output and send the programmed
ANI tones out the TX Tone Output.
ENI Encode:
When the Emergency button is pressed, the unit will assert the PTT Output and send the
programmed Emergency ANI tones out the TX Tone Output.
Note:
On the portable radios the emergency from
the external mic is not supported.
Lone Worker Enable:
The Lone Worker feature can be enabled upon power up or using the Mode Input or
Emergency Input.
Lone Worker Reset:
If the Lone Worker feature is being used, pressing the PTT or pressing the button assigned
to Lone Worker Reset will reset the Transmit Delay timer. If the Warning Tone Delay time expires the unit will
generate warning tones to indicate to the user that the Lone Worker feature is about to send an ENI if the unit
does not see PTT or Lone Worker Reset activity. If the Transmit Delay time then expires the unit will send the
ENI.
Message Recording on Power Up:
If the Auto Record feature is enabled the unit will record a voice message
immediately upon power up. If the radio requires PTT to pass voice to the option board and the Require PTT to
Record box is checked, the unit will wait to record until the PTT is pressed.
Message Recording with Mode Button:
Using the button(s) set for controlling record start and stop, press the
button in the manner programmed in Mode Input to start recording. If the radio requires PTT to pass voice to the
option board and the Require PTT to Record box is checked, the unit will wait to record until the PTT is pressed.
When recording is completed, press the button in the manner programmed in Mode Input to stop recording. When
the recording is stopped the unit will play back the recorded message if the Auto Review box is checked.
Содержание VAE-1-VX1
Страница 26: ... This page intentionally left blank ...
