Midian SVR-1-KW2, Руководство пользователя

Страница: 4 / 20

4
1B
PRODUCT PROGRAMMING
The SVR series are programmed using Midian’s KL-4F and the MPS software
Go to our website midians.com and under downloads> software download the latest MPS software version. If
using the supplied CD-ROM insert it into the PC’s CD-ROM drive. In the browser that will pop-up, install the MPS
programming software. Be certain that the “Install KL-4 USB Driver” box is checked during the installation
process.
Open Windows’ Control Panel and go to Device Manager.
Open Ports (COM& LPT) to identify the port assignment issued by computer. Plug in the KL4 programmer to the
USB port and the screen will flash and show the device location.
Open the software and choose product from product tree then set appropriate comport selection in the MPS
software as needed
After entering the parameters, save the file by going to File - Save As. Enter the file name in the File Name block
and click Save. Saving the file will allow for quick and easy reprogramming of units.
KL-4 Programming: The Yellow and Green KL-4 leads need to be connected to the unit for programming.
Connect the green KL-4 lead to the program in hole (see below), connect the yellow KL-4 lead to the program out
hole (see below) on the unit. The black lead does not need to be connected when using the KL-4. Plug the board
onto the KL-4 p-7 KW2 connector. Push and hold the power button on the KL-4 and wait three seconds, then
click “Program Unit” in the KL-3 software.
KL-4 Reading: The Yellow and Green KL-4 leads need to be connected to the unit for reading. Connect the
green KL-4 lead to the program in hole (see below), connect the yellow KL-4 lead to the program out hole (see
below) on the unit. The black lead does not need to be connected when using the KL-4. Plug the board onto the
KL-4. Push and hold the power button on the KL-4 and wait three seconds, then click “Read Unit” in the KL-3
software.
Program In
Program Out