Midian PDE-1, Инструкция по эксплуатации

Страница: 8 / 26

P
AGE
8 M
IDIAN
E
LECTRONICS
I
NCORPORATED
Code of the unit you wish to call.
Direct Alphanumeric Entry mode – Key in the User
Name as it appears in the user database.
Numeric Select mode – Press the right <SCROLL>
button to enter select mode. Now you can use both left
and right <SCROLL> buttons to select a CAP code
from the database. Also, you may enter a partial CAP
code prior to pressing right <SCROLL> to find the 1
st
entry in the database matching the partial code.
Alphanumeric Select mode – Press the right
<SCROLL> button to enter select mode. Now you can
use both left and right <SCROLL> buttons to select a
CAP code from the database. Also, you may enter a
partial name prior to pressing right <SCROLL> to find
the 1
st
entry in the database matching the partial name.
Remember, you can use the <*> to toggle between
numeric and alphabetic entry modes. Press <SEND>
to make the call. When sending to a POCSAG pager,
you will then be prompted for a numeric or
alphanumeric message. Entering a message may be
done in several ways.
5.1.1 POCSAG Message Entry
Numeric Entry mode – Simply key in the numeric
message up to 14 digits.
Alphanumeric Entry mode – Key in an alphanumeric
message up to 25 characters.
Select mode – Press the right <SCROLL> button to
enter select mode. Now you can use both the left and
right <SCROLL> buttons to select a message from the
list of 10 ‘pre-canned’ messages in the Saved
Messages list.
Press <SEND> after message entry to place the page.
Note: Numeric POCSAG pagers can decode the
following special non-numeric characters: space ? U - [
]. Alphanumeric entry mode is required to enter these
special ‘numeric’ characters. Note that the U character
is typically understood to mean ‘urgency’.
Press <#> to escape the Call mode and return to the
Main Menu.
5.2 LOCK
OR
UNLOCK
COMMAND
Note The LOCK and UNLOCK menu options do not
appear unless enabled in SECURITY SETUP .
Selecting LOCK will disable access to the parts of the
menu system described in the following sections.
Select UNLOCK to enable the entire menu system.
You must enter a 4-digit password to unlock the menu
system. See
SECURITY SETUP for more information.
5.3 USERS
MENU
5.3.1 Add User menu
Allows the system administrator to add a new user to
the database. When ADD USER is selected, you will
be prompted to fill in the information for that user such
as User Name and CAP Code. See
EDIT USER for
more information.
5.3.2 Delete User menu
Allows you to delete a user record from the database.
When DELETE USER is selected, you will be able to
select the user you wish to delete in the same manner
as if placing a call to a unit. Use the scroll buttons to
find the user you wish to delete. Press <SEND> to
delete the selected user. You will have to press
<SEND> a second time to confirm. Press <#> to
cancel if you change your mind.
5.3.3 EDIT USER menu
Allows you to change information about a user. Select
the user you wish to edit in the same manner is if
placing a call to that user. Use the scroll buttons to find
the user you wish to edit. Press <SEND> to edit the
information for the selected user.
You will be prompted to fill out each field in turn. After
entering the data for a field, press <SEND> to go on to
the next field. To leave a field unchanged, simply press
<SEND> without entering data.
5.3.3.1 User Name field
This alphanumeric field contains the name of the user
associated with a unit. A maximum of 14 characters
may be used. A name already in the database will not
be accepted. See the
Data Entry section for more
information.
Range: 0-14 characters
Default: blank
5.3.3.2 Pager Profile setting
Select from among the 10 pager profiles by name
using the <SCROLL> buttons.
Range: 0-14 characters
Default: N/A
5.3.3.3 CAP Code field or Frequency fields
If the pager type is 2-tone, 5-tone, DTMF, or POCSAG,
You will be prompted for a numeric CAP code to be
associated with the unit. If using AVCALL, see the
section 6.2.1 for entry instructions. If using Motorola
Quick Call 1 (2+2), see section 6.2.2 for entry
instructions.
Range: 1-10 digits depending on pager format
Default: blank
If the pager type is ‘any 2-tone’ you will be prompted to
enter two 5-digit frequencies. The 1
st
digit is the 1000’s
place and the last the 1/10’s place. For example 615.8
Hz is entered as 06158, 1985.0 Hz is entered as
19850. Technically, you can enter anything from
0000.0 to 9999.9 Hz, however the practical maximum
is about 3000.0 Hz.
Range: 5 digits