7
VX-800:
This radio requires programming software CE-31 v1.20 or higher. Read the radio with the option board installed.
Select “Signaling” from the menu and then “ANI”. Set the “ANI Type” as “Option ANI”.
To set a button for control of the Emergency ANI, select “Common” from the menu and then “Key Function”. Set
“(Sel 1) Key” or “(Sel 2) Key” to “ACC1”.
On the main screen, flag the “ANI” column on every channel that is desired to send the ANI.
Under the “Common” menu, select “Miscellaneous”, and set the “CTCSS Tail Elim” as “Disabled”. This must be
disabled if using trailing ANI. It is also recommended not to use the Courtesy Tone in the ANI-F-VX.
VX-820 & VX-920:
This radio requires programming software CE-59 v2.10 or higher. Read the radio with the option board installed.
Select “Signaling” from the menu and then “DTMF ANI”. Set the “ANI Type” to “MDC-1200”.
To set a button for control of the Emergency ANI, select “Common” from the menu and then “Key Function”. Set
“Top Sel” to “Option Switch 1”.
On the main screen, flag the “DTMF ANI” column on every channel that is desired to send the ANI.
Under the “Common” menu, select “Miscellaneous”, and set the “Squelch Tail Elim” as “Disabled”. This must be
disabled if using trailing ANI. It is also recommended not to use the Courtesy Tone in the ANI-F-VX.
VX-2100 & VX-2200:
This radio requires programming software CE-82 v1.12 or higher. Read the radio with the option board installed,
select “Common” from the menu and then “Key Function”. Set “P1-P4” to “Option SW”.
On the main screen, flag the “ANI” column on every channel that is desired to send the ANI.
Under the “Common” menu, select “Miscellaneous”, and set the “CTCSS Tail Elim” as “Disabled”. This must be
disabled if using trailing ANI. It is also recommended not to use the Courtesy Tone in the ANI-F-VX.
Note:
Mic Mute is not supported in these radios.
VX-4100 & VX-4200
:
For the VX-4100 & VX-4200 radio programming software CE-59 v1.01 or higher must be used.
Read the radio with the option board installed. Select “Common” from the menu and then “Option”. The “Option
Unit” should be read as “FVP-35”.
Under the “Common” heading select “Key Function” to set which key will control Emergency ANI. Set the “P1-P4”
or “A” button to “Option Switch 1”.
Note: Do not check the DTMF ANI column.
Download the program to the radio.
