3
PRODUCT PROGRAMMING
Midian’s ANI-F-VX is programmed via Midian’s KL-3 and VPI-1 or the new KL-4 programmer. Please reference
the KL-4 manual or the KL-3 and VPI-1 manuals for setup instructions. From the product selection screen on the
KL-3 software, select the ANI-F-VX from the list and the desired ANI format and click OK. If 2-tone or custom
tones will be used in the ANI-F-VX, you will need to select “Enable Advanced ANI Tone Definitions” in the “ANI
Tone Definitions” tab.
Set the parameters of the scrambler software to fit the application. If any clarifications on a feature are required,
move the mouse cursor over the feature name until the question mark appears and right click, a definition of the
feature will be shown.
Programming:
Plug the board onto the KL-4 or the VPI-1. Push and hold the PTT button and then press and
hold the power button on the KL-4 or VPI-1 and click “Program Unit” in the KL-3 software. The LED on the KL-4
or VPI-1 will faintly flash if programmed successfully. After programming the buttons can be released.
Reading:
Plug the board onto the VPI-1. Push and hold the PTT button and then press and hold the power
button on the KL-4 or the VPI-1A and click “Read Unit” in the KL-3 software. After reading the buttons can be
released.
