4
PRODUCT PROGRAMMING
Midian’s SVR-1-KW1 is programmed via Midian’s KL-4 programmer. Please reference the KL-4 manual for setup
instructions of the programming software and hardware. From the product selection screen on the programming
software, select the SVR-1-KW1 from the list and click OK.
Set the parameters of the scrambler software to fit the application. If any clarifications on a feature are required,
move the mouse cursor over the feature name until the question mark appears and right click, a definition of the
feature will be shown.
After entering the parameters, save the file by going to File - Save As. Enter the file name in the File Name block
and click Save. Saving the file will allow for quick and easy reprogramming of units.
Programming:
Plug the board onto the KL-4. Push the power button on the KL-4 and click “Program Unit” in the
programming software. The LED on the KL-4 will faintly flash if programmed successfully.
Reading:
Plug the board onto the KL-4. Push the power button on the KL-4 and click “Read Unit” in the
programming software.
