11
Programming the Audio Levels:
After determining the audio levels at the audio hookup points, it will be necessary to program the SVR to match
these levels. In the programming software, there is a slider control on the Audio Levels Screen for each of the of
four audio hookup points. Locate the column that corresponds to the modulation and units of measurement for
each of the audio hookup points. Adjust the slider bar such that the value appearing in the appropriate column
matches what was measured as closely as possible. Midian recommends the following values based on 60%
modulation:
Radio Model
RX In
TX In
RX Out
TX Out
TK-2180, TK-3180
924 mVpp
114 mVpp
912 mVpp
156 mVpp
TK-7180, TK-8180
864 mVpp
258 mVpp
888 mVpp
276 mVpp
