22
OPERATION
ANI Encode:
When the PTT button is pressed, the unit will assert the PTT Output and send the programmed
ANI tones out the TX Tone Output.
ENI Encode:
When the Emergency input is activated, the unit will assert the PTT Output and send the
programmed Emergency ANI tones out the TX Tone Output.
Lone Worker Enable:
The Lone Worker feature can be enabled upon power up or using the Mode Input or
Emergency Input.
Lone Worker Reset:
If the Lone Worker feature is being used, pressing the PTT or pressing the button assigned
to Lone Worker Reset will reset the Transmit Delay timer. If the Warning Tone Delay time expires the unit will
generate warning tones to indicate to the user that the Lone Worker feature is about to send an ENI if the unit
does not see PTT or Lone Worker Reset activity. If the Transmit Delay time then expires the unit will send the
ENI. Lone Worker can also be reset based on a lack of motion detected by the accelerometer.
TECHNICAL NOTES
Radio Compatibility:
Midian has taken the utmost care to ensure the option board integrates into the radio with
minimal impact to the features of the radio. However, some features may not be available in the radio when an
option board is used. If a feature is not available, please contact Midian to see if the feature can be added.
MIDIAN CONTACT INFORMATION
MIDIAN ELECTRONICS, INC.
2302 East 22
nd
Street
Tucson, Arizona 85713 USA
Toll-Free:
1-800-MIDIANS
Main:
520-884-7981
E-mail:
Web:
www.midians.com
