10
PTT > Active Polarity:
This sets whether the unit looks for an active low or active high to send the ANI.
PTT > Debounce:
If checked the unit will require a continuous active state for 30 msec before accepting the PTT.
Mode > Type:
Select whether the switch is Momentary or Latched for Lone Worker on/off and reset.
Mode > Active Polarity:
Select the active polarity of the mode switch.
Mode > Debounce:
If checked the unit will require a continuous active state for 30 msec before accepting the
mode change.
The remaining fields set how the switch is used (short press, long press or double press) and for which function
(Lone Worker enable or Lone Worker Reset).
