- 9 -
Connect Beverage Cooler with Power Source
Connect Beverage Cooler with Power Source
After placing the Beverage Cooler, please wait for at least half an hour before
the Beverage Cooler can be operated. This is because the engine oil in the
compressor may flow into the cooling system during the transportation
process.
Before the first running, please clean the inside chambers of the Beverage
Cooler (Please see the section on cleaning).
The power socket should be in such as place, where is reachable conveniently.
Please use a socket that’s installed according to the requirements. The
Beverage Cooler should be connected with 220-240V/50Hz AC power.
Warning!
In any case, please do not connect the Beverage Cooler to the electronic
energy saving power plug or the converter (such as: solar energy equipment,
ship’s electric grid) that convert DC into 220-240V AC.
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.