- 7 -
The appliance is not intended for use by young children or infirm persons
without supervision; young children should be supervised to ensure that
they do not play with the appliance
Before Using Your Beverage Cooler
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
5 Shelves 1 Bottle/Can Basket 3 Glass Shelves 1 Instruction Manual
Before connecting the Beverage Cooler to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Beverage Cooler
This appliance is designed to be free standing only, and should not be
recessed or built-in (fully recessed).
Place your Beverage Cooler on a floor that is strong enough to support it when
it is fully loaded. To level your Beverage Cooler, adjust the adjustable leg at the
bottom of the unit.
Allow 5 inches of space between the back and sides of the unit, which allows
the proper air circulation to cool the compressor.
Locate the Beverage Cooler away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug the Beverage Cooler into an exclusive, properly installed-grounded wall
outlet. Do not under any circumstances cut or remove the third (ground) prong
from the power cord. Any questions concerning power and/or grounding