manualshive.com logo in svg

Midea TJE17GS7-S00N0A, Руководство по обслуживанию

Поделиться
Скачать
Midea TJE17GS7-S00N0A Скачать руководство пользователя страница 34

NOTICE:

If the electric connections have not been restored properly this may lead to malfunction

/damage of the oven.

5.7 Replacing the power panel

Requirements

Check that the following requirements have been met:

Fitting the power panel

Follow the steps in the reverse order to fit the power panel.

Reconnect all electric connections to the power panel.

5.8 Replacing the control panel.

Requirements

2

Unplug the wire.
Note: 
It is necessary to record the 
corresponding insertion point of each 
wire before unplugging.

Remove the three M4 screws.

1

The appliance has been disconnected from the power supply and protective 
measures have been taken to ensure the power cannot be switched on again.

The appliance is cool.

The top, left and right panels of the casing of the appliance have been removed.

The high voltage capacitors are discharged before commencing work.

32

Содержание TJE17GS7-S00N0A















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды