MCAC-UTSM-2014-03 R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
66
1. Notes
CAUTION:
Transport the air conditioner with the original package.
Do not throw the remote controller and wired controller.
If the air conditioner needs to be installed on a metal part of the building, electric insulation must
be performed, and the installation must meet the relevant technical standards of electric devices.
The unit must be installed 2.3m above floor and shall not be installed in the laundry.
The enclosure of the appliance shall be marked by word, or by symbols, with the direction of fluid
flow.
An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be
connected in fixed wiring.
Operate the remote controller within the receiving scope of the indoor unit, and direct the
transmitting part of the remote controller to the receiver of the indoor unit.
Install the unit where enough space of installation and maintenance is available.
Install the unit where the ceiling is horizontal and enough for bearing the weight of the indoor unit.
Install the unit where the air inlet and outlet are not baffled and the least affected by external air.
Install the unit where the supply air flow can be sent to all parts in the room.
Install the unit where it is easy to lead out the connective pipe and the drain pipe.
Install the unit where no heat is emitted from a heat source directly.
Installing the equipment in any of the following places may lead to faults of the equipment (if that
is inevitable, consult the supplier):
The site contains mineral oils such as cutting lubricant.
Seaside where the air contains much salt.
Hot ring area where corrosive gases exist, e.g., sulfide gas.
Factories where the supply voltage fluctuates seriously.
Inside a car or cabin.
Содержание TempMaker Series
