13
The FOLLOW ME function enables the
remote control to measure the temperature
at its current location and
.
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
remote control (instead of from the indoor
unit itself) will enable the air conditioner to
optimize the temperature around
you and ensure maximum comfort.
send this signal
to the air conditioner every 3 minutes interval
FOLLOW ME function( )
(optional)
Silence function
LOCK function
SLEEP Function( )
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note:
The SLEEP function is not
available in FAN or DRY mode.
,
How To Use The Advanced Functions
How To Use The Advanced Functions
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you select
TURBO
feature in COOL
mode, the unit will blow cool air with
strongest wind setting to jump-start the
cooling process.
When you select
TURBO
feature in HEAT
mode, the unit will blow heat air with
strongest wind setting to jump-start the
heating process.
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the
SELF CLEAN
feature is
activated, your unit will clean itself
automatically. After cleaning, the unit will
turn off automatically.
You can use
SELF CLEAN
as often as
you like.
Note:
You can only activate this function
in COOL or DRY mode.
NOTE:
Press the SET button,
the selected function
indicator will flash on
the display area, press
Temp or Temp
button to confirm. The
indicator remains on
and this function is
activated.
To cancel the selected
function, just perform
the same procedures
as above.
Hold together to activate
LOCK function
SELF CLEAN function( )
(optional)
TURBO function( )
For the detail, see sleep operation in
USER S MANUAL.
,
, ,
, ,
,,
,,
FRESH function( )
(optional)
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending
on models) is energized and will help to
remove pollen and impurities from the air.
Hold down Fan speed button( ) for 2 seconds
to activate/cancel
Silent
mode. Due to low
frequency operation of compressor, it may result
in insufficient cooling and heating capacity
(applicable to the air conditioner with Silent
feature only)
Press button and button
simultaneously for one second to
lock or unlock the keyboard.
ECO/GEAR function( )
ECO operation:
GEAR operation:
NOTE:
This function is only available under
COOL mode.
Press ECO/GEAR button to enter the energy
efficient mode in a sequence of following:
ECO GEAR(75%) GEAR(50%)
Previous setting mode ECO ......
Under cooling mode, press this button, the
remote controller will adjust the temperature
O
automatically to 24 C, fan speed of Auto to
save energy(but only if the set temperature
O
is less than 24 C). If the set temperature is
O
above 24 C , press the ECO button, the fan
speed will change to Auto, the set temperature
will remain unchanged.
NOTE:
Pressing the ON/OFF button, modifying the
mode or adjusting the set temperature to less
O
than 24 C will stop ECO operation.
Under ECO operation, the set temperature
O
should be 24 C or higher. it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
Press this button to enter the energy efficient
mode in a sequence of following:
75%
(up to 75% electrical energy consumption)
50%
(up to 50% electrical energy consumption)
Previous setting mode
This function is only available under COOL
mode.
Under GEAR operation, the display on the
remote controller will alternate between
electrical energy consumption and set
temperature.
14
When the air conditioner operates under
heating mode with the set temperature
O
O
of 16 C(60 F), pressing button twice
O
O
in 2 seconds will activate 8 C(46 F)
heating. The indoor unit display shows
FP .
,,
, ,
FP function
Mode
SET
Mode
SET
Hold and
buttons together for 3
seconds will alternate
the temperature
display between the
O
O
C & F scale.
