ENGLISH
4
NOT SURE WHAT A FUNCTION DOES?
Refer to the
How to Use Basic Functions
and
How to Use Advanced Functions sections
of
this anual for a detailed description of how to use
your air conditioner.
SPECIAL NOTE
z
Button designs on your unit may differ slightly
from the example shown.
z
If the indoor unit does not have a particular
function, pressing that function s button on
the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
Put the two batteries(optional parts) in the remote
control before use:
1.
Remove the back cover from the remote
control, exposing the battery compartment.
2. Insert the batteries, paying attention to match
up the (+) and (-) ends of the batteries with
the symbols inside the battery compartment.
3.
Install the back cover on.
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or
stand by using a remote controller holder.
1.
Before installing the remote controller, check
that the air conditioner receives the signals
properly.
2.
Install the holder with two screws.
3. Put the remote controller on the holder.
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or batteries of
different types.
Do not leave batteries in the remote control if you
don t plan on using the device for more than 2
months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal
waste. Refer to local laws for proper disposal of
batteries.
TIPS FOR USING REMOTE CONTROL
z
The remote control must be used within 8
meters of the unit.
z
The unit will beep when remote signal is
received.
z
Curtains, other materials and direct sunlight
can interfere with the infrared signal receiver.
z
Remove batteries if the remote control will not
be used more than 2 months.
Remove the back cover to install batteries
