3
3
4
4
Operation of buttons
Operation of buttons
NOTE
Temperature contol is not available
in Fan mode.
TEMP
TEMP
AUTO
COOL
DRY
HEAT
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
FAN
HIGH
MED
LOW
MODE
MODE
TIMER ON
TIMER ON
SLEEP
ECO
ON/OFF
ON/OFF
TIMER OFF
TIMER OFF
RESET LOCK
RESET LOCK
1
1
2
2
4
4
5
5
6
6
7
7
3
3
9
9
8
8
10
10
11
11
12
12
13
13
O
SET TEMPERATURE( C)
O
SET TEMPERATURE( C)
SWING
SWING
TURBO
TURBO
1
TEMP UP Button
Push this button to increase the indoor temper-
O
O
ature setting in 1 C increments to 30 C.
2
TEMP DOWN Button
Push this button to decrease the indoor temper-
O
O
ature setting in 1 C increments to 17 C.
3
MODE Button
4
SWING Button
6
7
5
RESET Button
Once the recessed RESET button is pressed,
all of the current settings will be cancelled and
the controller will return to the initial settings.
AUTO
COOL
DRY
HEAT
FAN
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
Press this button to modify the air conditioner
mode in a sequence of following:
NOTE
Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling
only appliance.
DO NOT DISTURB Button
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under DO NOT DISTURB mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
8
9
ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
O
automatically to 24 C, fan speed of Auto to
save energy(but only if the set temperature
O
is less than 24 C). If the set temperature is
O
O
between 24 C and 30 C, press the ECO
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
NOTE:
Pressing the TURBO and SLEEP button,
modifying the mode or adjusting the set
O
temperature to less than 24 C will stop
ECO operation.
Under ECO operation, the set temperature
O
should be 24 C or more. it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
ECO Button(
applicalbe for RG51G/E
):
DO NOT
DISTURB
DO NOT
DISTURB
RG51G/E
RG51H/E
SLEEP Button(
applicable for RG51H/E
):
NOTE:
While the unit is running under
SLEEP mode, it would be cancelled if
MODE, FAN SPEED or ON/OFF button
is pressed.
Active/Disable sleep function. It can
maintain the most comfortable temper-
ature and save energy. This function is
available on COOL, HEAT or AUTO
mode only .
For the details, please see sleep
operation in USER S MANUAL.
,
, ,
, ,
,,
,,
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN/SILENCEC Button
If pushing more than 2 seconds, the Silence
function will be activated, pushing more than
2 seconds again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and creat a quiet and comfortable
room for you. Due to low frequency operation
of compressor, it may result in insufficient
cooling and heating capacity.
FAN /SILENCE
FAN /SILENCE
