![background image](http://html1.mh-extra.com/html/midea/mm-tls2010-2/mm-tls2010-2_manual_1790901013.webp)
13
tube after cooling.
It is difficult to take
out the stirring piece.
The stirring piece is tightly
adhered to the stirring
rotating shaft of the bread
barrel
Take out the bread, soak the bread barrel
in warm hot water for 10 minutes, and
take out the stirring pieces to clear them.
The motor was heard
rotating, but the
dough did not stir.
The bread barrel is not
installed properly or the
dough is too large.
Check whether the bread barrel is
installed correctly or whether the dough
is prepared according to the formula.