Control panel
Dryer exterior
Stainless steel or anonized drum
CARE AND MAINTENANCE
30
•
•
•
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre-treatment
soil and stain remover products. Apply such products away from your
dryer and wipe up any spills or overspray immediately.
•
•
•
•
•
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects or a detergent box on the dryer.
Keep them on the purchased pedestal or in a separate storage box. This
may scratch or damage the top cover of the dryer.
Since the entire dryer has a high-gloss finish, the surface can be
scratched or damaged.
Avoid scratching or damaging the surface when using the dryer.
•
•
To clean the stainless steel or anonized drum, use a damp cloth with a
mild, non-abrasive cleaner suitable for stainless steel and anonized
surfaces.
Remove the cleaner residue and dry with a clean cloth.
WARNING
Certain internal parts are intentionally not grounded and may present a
risk of electric shock only during servicing. Service Personnel – Do not
contact the following parts while the appliance is energized: Main Motor,
Cooling Fan. Do no touch the heat exchanger with your hand, which may
cause an injury.
DRYER CARE
Requirements
Installation
Instructions
Dryer Use
Dryer Care
Tro
ub
le
sh
oo
tin
g
Safety and
Precautions
Installation
