Midea MJ-60FM01B1, Руководство пользователя

Страница: 9 / 11

P
8. Start with half to threequarters of a cup of ice, or 4 to 6 cubes,
and add 15ml (1 tbsp) of water.
9. Put the lid on the blender, then turn the speed control to ( ) for a
second or so, check the state of the ice, and repeat till the ice is
the consistency that you need
10. Switch off (0) and unplug before cleaning.
11. Wipe the outside of the motor unit with a clean damp cloth.
12. Handwash the removable parts.
13. If you use a dishwasher, the harsh environment inside the
dishwasher will affect the surface finishes.
Don't put any part of the appliance in a dishwasher.
14. The damage should be cosmetic only, and should not affect the
operation of the appliance.
1. Lower the jug on to the motor unit, then turn the jug clockwise,
to lock it in place.
2. Pull the lid up and off the jug – it’s stiff, because of the seal.
3. Put the ingredients into the jug – don’t fill past the max mark.
4. Put the lid on the jug, and push it down to seal it.
5. Align the pips on the cap with the slots in the hole, fit the cap in
the hole, and turn clockwise.
Don’t run the blender without the cap.
6. To add ingredients while the motor is running:
a) turn the cap clockwise to unlock it, and lift it off
b) add the ingredients via the hole
c) replace the cap, and turn it anti-clockwise to lock it
7. Turn the jug anti-clockwise to unlock, and lift it off the motor unit.
Crushing ice
Care and maintenance
8