6
Hook the hood body
●
Hook the hood body to the bracket
20
.
●
Level the hood body itself.
● Lock screws (M5*12) into the hood fixing bracket to prevent the hood body from accidentally
sliding off.
● Remove the filter from the inside of the hood body, and fix the screw
10
to wall plug
11
at the point
(3) (optional)
.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or a rigid pipe of ɸ 150 or ɸ 120 mm, the choice
of which is left to the installer.
● Insert the reducer flange 3 onto the hood body outlet to install a ɸ
120 mm air exhaust connection.
● Fix the pipe 4 in place using sufficient pipe clamps (not supplied).
● Remove possible charcoal filters.