
10
● Remove the grease filter, and carefully remove 2 screws from the front plate (a cross headed
screwdriver will be needed to remove the screws).
●
Disconnect the terminal of LED light.
●
Press LED light at the back of the front plate, and take it out.
● Replace the light (commercially available LED light (max. 1.5 w)
Max Power
Voltage
Picture
Light Cap
ILCOS D Code
Round/ Diameter:
70 mm
1.5 W
DC 12 V
— —
DSR-1.5-S-70
Reinstalling LED light module
●
Press LED light in the front of the front plate, and install the LED light onto the front plate.
●
Connect the terminal of LED light and light leads.
● Carefully fasten 2 screws on the front plate, and reinstall the grease filter.